Most distributed photovoltaic power plants are installed on rooftops; for flat roofs, a concrete foundation is typically required, while corrugated steel roofs usually use clamp-mounted支架. Below is a brief overview of the installation steps and process specifically tailored for flat roofs.

Solar power systems are divided into two types: grid-connected and off-grid.

A distributed photovoltaic grid-connected power plant primarily consists of solar modules, PV mounting structures, PV surge protection combiner boxes, grid-tie inverters, and other installation accessories.

Photovoltaic / The wind-solar hybrid solar power station primarily consists of solar modules. / It consists of wind turbines, solar controllers, wind-solar hybrid controllers, inverters, batteries, PV mounting structures, and other complementary components.

Installation of Distributed Photovoltaic Grid-Connected Power Plants:

Most distributed photovoltaic power plants are installed on rooftops; for flat roofs, a concrete foundation is typically required, while corrugated steel roofs usually use clamp-mounted支架. Below is a brief overview of the installation steps and process specifically tailored for flat roofs.

First, fabricate the concrete foundation according to the design drawings. This will be carried out in two separate steps: equipment installation and cable connections.

Off-grid photovoltaics / Wind-Solar Hybrid Power Station Installation:

Off-grid photovoltaics / Most wind-solar hybrid power stations are located in areas where grid electricity is unavailable or where accessing power sources is inconvenient. First, concrete foundations for the solar panels and wind turbines need to be constructed. Below is a brief overview of the installation steps and process.

First, fabricate the concrete foundation according to the design drawings. This will be carried out in two separate steps: equipment installation and cable connections.